Citroen Xantia

since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ engine Repair
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
- Body and salon furnish
   Care of components of a body and car bottom
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal, installation and cowl adjustment
   Removal and installation of a driving cable of an otpuskaniye of the lock of a cowl
   Removal and installation of locks of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of regulators of window regulators of door windows
   Removal, installation and adjustment of a door of a back and its telescopic emphasis
   Removal and installation of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of door window regulators
   Removal and installation of door rear-view mirrors and accompanying components
   Windscreen, glass of a door of a back and the other fixed glasses - the general information
   The top hatch - the general information
   External body furnish
   Removal and installation of seats
   Removal and installation of seat belts
   Removal and installation of elements of internal furnish of salon
   Removal and installation of the central console
   Removal and dashboard installation
   Control body sizes
+ Onboard electric equipment
+ electric equipment Schemes



Removal and installation of a driving cable of an otpuskaniye of the lock of a cowl

Forward section of a cable

Removal

 PERFORMANCE ORDER

1. Remove the left lock of a cowl and disconnect from it a driving cable (see. Removal and installation of locks of a cowl).
2. Liberate a cable from intermediate clamps and directing in an impellent compartment.
3. Disconnect the opposite end of a cable from a connecting plate in an impellent compartment. Remove hummock assembly.

Installation

Installation is made upside-down.

Back section of a cable

This work demands from the performer of certain skills, and it will be reasonable to charge its performance to specialists of car-care center.

Removal

 PERFORMANCE ORDER

1. Remove the dashboard (see. Removal and dashboard installation) and heater assembly (see. Head of System of cooling, heating).

2. In salon of the car turn out a fixing bolt and remove from an arm of a steering column the lever of an otpuskaniye of a latch of the lock of a cowl.

3. In the left part of an impellent compartment disconnect the end of a driving cable from a connecting plate.
4. Liberate a driving cable from directing and intermediate clamps in an impellent compartment. Try to remember a route of laying of a cable.
5. Return to salon and also liberate a cable from the clamps located there on an arm of a steering column.
6. Tie up by the internal end of a cable a piece of a string and involve assembly in an impellent compartment.
7. Untie a string, having left it passed in the plug through passage in a partition of an impellent compartment, and remove hummock assembly from the car.

Installation

 PERFORMANCE ORDER

1. Tie up the internal end of a cable to the string passed through a partition and involve assembly in car salon. Lay a cable on the former route and fix in all provided clamps and directing.
2. Fix the cable end in a connecting plate and establish наместо the lever of an otpuskaniye of a latch.
3. Establish into place heater assembly (see. The head of System of cooling, heating) and the dashboard (see. Removal and dashboard installation).