Citroen Xantia

since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ engine Repair
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
- Body and salon furnish
   Care of components of a body and car bottom
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal, installation and cowl adjustment
   Removal and installation of a driving cable of an otpuskaniye of the lock of a cowl
   Removal and installation of locks of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of regulators of window regulators of door windows
   Removal, installation and adjustment of a door of a back and its telescopic emphasis
   Removal and installation of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of door window regulators
   Removal and installation of door rear-view mirrors and accompanying components
   Windscreen, glass of a door of a back and the other fixed glasses - the general information
   The top hatch - the general information
   External body furnish
   Removal and installation of seats
   Removal and installation of seat belts
   Removal and installation of elements of internal furnish of salon
   Removal and installation of the central console
   Removal and dashboard installation
   Control body sizes
+ Onboard electric equipment
+ electric equipment Schemes



Removal and installation of door handles and lock components

Internal handle

Removal

 PERFORMANCE ORDER

1. Remove the panel of an internal upholstery of a door (see. Removal and installation of panels of an internal upholstery of doors).

2. Release the coupling screw of a collar of fastening of an executive rod, shift the handle forward and separate it from a door. Pay attention that at removal of the handle of a back door the executive rod of the button of switching off of the lock should be liberated from a door without a detachment from the handle.

3. Disconnect from the handle an executive rod of the door lock.

4. At the corresponding complete set before removal of the handle liberate an electroconducting plait from a clamp located in its top part.

Installation

Installation is made upside-down. Do not forget to tighten the coupling screw of a collar of fastening of an executive rod. The description of procedure of installation of the panel of an internal upholstery is provided in the section Removal and installation of panels of an internal upholstery of doors.

External handles of forward doors

Removal

 PERFORMANCE ORDER

1. Remove the panel of an internal upholstery and the plastic sealing screen (see. Removal and installation of panels of an internal upholstery of doors).

2. From a back end face of a door turn out three screws of fastening of zamkovy assembly. Liberate an executive rod of the internal handle from a clamp on a door for the purpose of a possibility of turn of assembly.

3. In a frame of a door disconnect from the lock an executive rod of the external handle.

4. Through an opening in a doorframe turn out the fixing screw.

5. Remove the external handle together with executive rods.

Installation

Installation is made upside-down. Pay attention to the next moments:
   a) Connection of an executive rod to the lock is simpler for making before fixing of zamkovy assembly by screws;
   b) The description of procedures of installation of the sealing screen and the panel of an internal upholstery is provided in the section Removal and installation of panels of an internal upholstery of doors.

External handles of back doors

Removal

 PERFORMANCE ORDER

1. Remove the panel of an internal upholstery and the plastic sealing screen (see. Removal and installation of panels of an internal upholstery of doors).
2. Completely lift a windowpane.

3. Turn out the fixing screw.

3. Take from a door directing trench of a windowpane.

4. Through an opening in a doorframe turn out the screw of fastening of the external handle.
5. Remove the external handle of a door and disconnect an executive rod of the lock.

Installation

Installation is made upside-down.

Cylinder of the lock of a forward door

Removal

 PERFORMANCE ORDER

1. Open a door, then take from an access opening in its back end face (at once over the lock) the rubber plug.
2. Insert a key into the lock.
3. Pass a long screw-driver in an opening of access and wring out a lock ring of fastening of the cylinder of the lock.

4. For a key extend the lock cylinder from the external handle of a door.

Installation

 PERFORMANCE ORDER

1. Fill the lock cylinder on the regular place, having latched it in a lock ring.
2. Plant in an access opening in a back end face of a door the rubber plug.

Assembly of the lock of a forward door

Removal

 PERFORMANCE ORDER

1. Remove internal and external door handles (see above), then take the lock from a door assembled with executive rods, at the corresponding complete set disconnect electroconducting.

Installation

Installation is made upside-down.

Assembly of the lock of a back door

Removal

 PERFORMANCE ORDER

1. Remove the external handle of a door (see above).
2. In a back end face of a door turn out three screws of fastening of zamkovy assembly.
3. Liberate executive rods from clamps on a door.

4. Through an opening in a doorframe take the lock with the executive rods connected to it (try to remember adjusting position of the last). At the corresponding complete set disconnect electroconducting.

Installation

Installation is made upside-down. Track correctness of installation of executive rods.