Citroen Xantia

since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ engine Repair
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
- Body and salon furnish
   Care of components of a body and car bottom
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal, installation and cowl adjustment
   Removal and installation of a driving cable of an otpuskaniye of the lock of a cowl
   Removal and installation of locks of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of regulators of window regulators of door windows
   Removal, installation and adjustment of a door of a back and its telescopic emphasis
   Removal and installation of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of door window regulators
   Removal and installation of door rear-view mirrors and accompanying components
   Windscreen, glass of a door of a back and the other fixed glasses - the general information
   The top hatch - the general information
   External body furnish
   Removal and installation of seats
   Removal and installation of seat belts
   Removal and installation of elements of internal furnish of salon
   Removal and installation of the central console
   Removal and dashboard installation
   Control body sizes
+ Onboard electric equipment
+ electric equipment Schemes



Removal, installation and cowl adjustment

Removal

 PERFORMANCE ORDER

1. Ask the assistant to take a cowl opened and lead round a marker contours of both loopy levels.
2. Disconnect from the cowl of a tee located from the bottom party a hose of supply of liquid of washing of a windscreen. Prepare for collecting spilled liquid.
3. Serially from each of boards of the car turn out fixing screws and disconnect tires of grounding of a cowl.
4. Turn out fixing bolts and by means of the assistant remove a cowl from the car and transfer it to a safe place.
5. Estimate люфт axial fingers of loopy assemblies, in case of need replace worn-out components. Each of loops приболчивается to a car body. Before installation of a cowl grease loopy levels with universal greasing.

Installation and adjustment

 PERFORMANCE ORDER

1. By means of the assistant get a cowl on the regular place and freely screw fixing bolts. Achieve an adequate arrangement of loopy levels in the contours led round by a marker, then strongly tighten bolts. Connect to a tee a hose of supply of liquid of washing of a windscreen.
2. Connect tires of grounding and strongly tighten bolts of their fastening.
3. Close a cowl and check uniformity of an arrangement of its rather adjacent body panels. In case of need weaken loopy bolts and make the corresponding adjustment. Having achieved satisfactory result, do not forget to tighten fixing bolts.
4. The height of provision of a first line of a cowl is corrected by means of the rubber buffers located in forward corners. Take the buffer, then weaken a lock-nut and as appropriate adjust the provision of a buffer bolt. Again tighten a lock-nut and return into place the buffer.
5. Having achieved the adequate provision of a cowl check serviceability of functioning of latches of its locks. In case of need weaken fixing bolts and adjust the provision of zamkovy assembly (ok). Do not forget to tighten fixture.