Citroen Xantia

since 1993 of release

Repair and car operation

Citroen Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ engine Repair
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Coupling
- Transmission
   - Manual box of gear shifting
      Replacement of transmission oil
      Drive of the mechanism of gear shifting - the general information and adjustment
      Removal and installation of components of a drive of gear shifting
      Replacement of epiploons
      Check of serviceability of functioning, removal and installation of the sensor switch of fires of a backing
      Removal and installation of a drive of a speedometer
      Removal and transmission installation
      Major maintenance of RKPP - the general information
   + Automatic transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ electric equipment Schemes

Major maintenance of RKPP - the general information

Major maintenance of RKPP demands from the performer of a high skill level as assumes need of exact exposure of a set of gaps by selection of adjusting washers and remote plugs. Besides, internal components of a transmission are rather difficult for finding on free sale, not to mention the high prices for them. In view of told, originators of the real Management recommend to make in case of violations of serviceability of functioning of RKPP replacement it on the new or restored block.

Nevertheless, rather skilled amateur mechanic without effort can execute transmission repair by own forces under condition of existence of the special tool and at a slow approach to performance as appropriate all necessary procedures.

In number of special tools without which application repair of RKPP becomes impossible, nippers for extraction of external and internal lock rings, a set of strippers, a hammer with sliding brisk, a set of drifts, a tsiferblatny measuring instrument of plunzherny type and, whenever possible, a hydraulic press belong. Besides, the workplace should be equipped with a big strong workbench with a vice.

In the course of dismantling of a transmission it is necessary to fix carefully on paper the adjusting provision of all removed components for the purpose of a guarantee of correctness of placement them at assembly.

Before starting RKPP dismantling, try to define for itself the possible reasons of taking place violations. Some problems are rather accurately adhered to functioning of concrete knots of a transmission that allows to reduce essentially time for identification and elimination of defects (see. Diagnostics of malfunctions of knots and car systems).