Citroen Xantia

since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ engine Repair
- Systems of cooling, heating
   Detachment and replacement of hoses of system of cooling
   Removal, check of a condition and radiator installation
   Removal, check of serviceability of functioning and thermostat installation
   Check of serviceability of functioning, removal and fan installation (ов) cooling systems
   Check of serviceability of functioning, removal and installation of electric switches and sensors of system of cooling
   Removal and installation of the water pump
   Removal and installation of a casing of the thermostat / fuel filter (diesel models)
   System of heating/ventilation of salon - the general information
   Removal and installation of components of system of heating/ventilation of salon
   Air central air - the general information and precautionary measures
   Removal and installation of components of central air of air
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ electric equipment Schemes



Removal and installation of the water pump

Removal

 PERFORMANCE ORDER

1. The drive of the water pump is carried out by a gas-distributing belt. The pump приболчен to the block of cylinders from GRM drive.
2. Empty cooling system (address to Head Routine maintenance).
3. Remove a belt of a drive of GRM (see. Head engine Repair).

4. Turn out fixing bolts and take pump assembly from the block of cylinders (optimum access opens through a wheel arch). Remove sealing laying.



Installation

 PERFORMANCE ORDER

1. Make sure of absoluteness of purity and dryness of interfaced surfaces of the pump and the block of cylinders.
2. Establish the pump on the regular place (do not forget to replace laying).
3. Establish a belt of a drive of GRM (see appropriate section of Head engine Repair).
4. Fill cooling system (address to Head Routine maintenance).