Citroen Xantia

since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ engine Repair
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
- Brake system
   Pumping of hydraulic system
   Replacement of hoses and tubes of a hydraulic path of brake system
   Replacement of blocks of disk brake mechanisms of forward wheels
   Replacement of blocks of disk brake mechanisms of back wheels
   Condition check, removal and installation of brake disks
   Removal, major maintenance and installation of supports of disk brake mechanisms of forward wheels
   Removal, major maintenance and installation of supports of disk brake mechanisms of back wheels
   Removal, major maintenance and installation of the valve of management
   Removal and installation of a pedal of a foot brake
   The parking brake - general information and adjustments
   Removal and installation of a control lever of the parking brake
   Removal and installation of cables of a drive of the parking brake
   Removal and installation of the sensor switch of stoplights
   System of anti-blocking of brakes (ABS) - the general information
   Removal and installation of components of system of anti-blocking of brakes
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ electric equipment Schemes



Removal, major maintenance and installation of supports of disk brake mechanisms of forward wheels

See the preventions provided in the section Brake system.

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Remove brake shoes (see. Replacement of blocks of disk brake mechanisms of forward wheels).
3. Get drain capacity under the connection union to a support of a hydraulic hose. Release the shtutserny socket and disconnect a hose from a support. At once закупорьте the open ends of a hose and the union for the purpose of minimization of losses of hydraulic liquid and in order to avoid hit in dirt system.

4. Turn out two fixing bolts and remove a support from stupichny assembly.

Major maintenance

Performance of regenerative repair of the failed support possibly only with application of a firm remnabor of the Citroёn company. Track, that the remnabor corresponded to type of the support removed from the car. Pay attention to correctness of installation of each of components. New laying and a sealant before installation grease with hydraulic liquid. For the rest follow instructions of manufacturers.

Installation

 PERFORMANCE ORDER

1. Establish a support on the regular place, with demanded effort having tightened fixing bolts.
2. Connect a hydraulic hose and strongly tighten the shtutserny socket.
3. Establish brake shoes (see. Replacement of blocks of disk brake mechanisms of forward wheels).
4. Connect a negative wire to the battery.
5. Pump over brake system (see. Pumping of hydraulic system).
6. Establish to the place of a wheel, lower the car on the earth and tighten wheel bolts with demanded effort.