Citroen Xantia

since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ engine Repair
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Coupling
- Transmission
   + Manual box of gear shifting
   - Automatic transmission
      Adjustment of a driving cable of a choice of transfers of AT
      Removal and installation of a driving cable of a choice of transfers of AT
      Removal and installation of assembly of the lever of the selector of transfers
      Adjustment of a driving cable of inclusion of the kick-down mode
      Replacement of a driving cable of inclusion of the kick-down mode
      Removal and installation of a drive of a speedometer
      Replacement of epiploons
      Removal and installation of a cooler of ATF
      The sensor switch of permission of starts/fires of a backing - the general information, removal and installation
      Removal and AT installation
      Major maintenance of AT - the general information
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ electric equipment Schemes


The sensor switch of permission of starts/fires of a backing - the general information, removal and installation

General information

The sensor switch will screw from above in a crater of transmission and carries out double function, in the first, providing possibility of start of the engine only in two provisions AT (R and N) and, in the second, operating inclusion of fires of a backing at a choice of a reverse gear. The first function of the sensor switch does not allow to make casual start of the engine at the transmission put on transfer. The sensor switch carries out this task by shutdown of giving of a food on the traction relay of a starter. Short circuit of the sensor switch occurs only in two provisions of transmission: R or N. Any other situation to be to testify to a sensor switch exit out of operation. At reverse inclusion the sensor switch carries out short circuit of a chain of signal lights of a backing, providing their inclusion. In default any of functions the sensor switch is subject to replacement assembled.

Removal

 PERFORMANCE ORDER

1. For the purpose of ensuring access to the sensor switch remove the battery with the pallet and a basic plate (see. Head engine Electric equipment).
2. Walk on electroconducting back from the sensor switch to the contact socket. Disunite the socket.
3. Turn out the sensor switch and take it from a transmission case, having removed together with a sealing ring.

Installation

 PERFORMANCE ORDER

1. Establish on the sensor switch a new sealing ring and screw assembly in the carving opening from above on a transmission case. Strongly tighten the sensor switch.
2. Restore initial connection of electroconducting. Establish into place a basic plate and the battery pallet. Strongly tighten fixture.
3. Establish and connect the storage battery (see. Head engine Electric equipment) also check serviceability of functioning of the sensor switch.