Citroen Xantia

since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ Operation manual
- Routine maintenance
   + Weekly checks
   + Routine maintenance of the car - petrol models
   + Routine maintenance of the car - diesel models
+ engine Repair
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ electric equipment Schemes


Routine maintenance

Specifications

Massogabaritnye of the characteristic

All specified parameters have approximate value and can change depending on model.

Dimensions
(values are given in brackets for the Versatile person models)

Total length, mm

4520 (4710)

Full width, mm

1760 (1760)

Full height of not loaded car, mm


1400 (1420)

Wheel base, mm

2740 (2740)

Weight

Net weight, kg

1176 ÷ 1260*

Maximum admissible weight gross, kg

1480 ÷ 1655*

Maximum permissible load
on the top luggage carrier, kg

75

Maximum allowable weight of the trailer, kg

1200

* Depending on model.

Pressure of a rating of tires (in a cold condition)

Tire type

Forward wheels, bar

Back wheels, bar

175/70 R 14 84Т

2.3

2.1

175/70 R 14 84Н

2.3

2.1

185/65 R 14 86Н

2.3

2.1

195/55 R 14 84V

2.4

2.2

165/70 R 14 81Т (запаска) *

2.9

2.9

185/65 R 14 87Т (запаска) *

2.5

2.5

Pressure of a rating of tires is given also on шильде, the driver's door fixed at back edge Given below value treat tires of a standard complete set and can differ from demanded parameters of the wheels established on the concrete car. Consult in a shinomontazhny workshop. Usually nominal pressure of a rating of the tire is specified on its lateral surface.
* Speed of movement of the car with the established spare wheel should not exceed 113 km/h (75 miles/h)

Types of greasings and liquids

Engines

Universal engine oil viscosity of SAE 10W/40 or 15W/50, API SG/CD

Cooling system

Antifreeze on base этиленгликоля with soft water

РКПП

Transmission oil, Shell SF5288 75/80W

АТ

ATF Dexron II

Hydraulic system

Mineral hydraulic LHM liquid

Volumes of working liquids

Impellent oil

l

Petrol models

   - Without the oil filter

      • L models 1.6 and 1.8

4.5

      • Models of 2.0 l

         a) Stamped pallet of a case

4.6

         b) Aluminum pallet

4.2

   - Including the oil filter, l

      • L models 1.6 and 1.8

4.8

      • Models of 2.0 l

 

         a) Stamped pallet of a case

5.0

         b) Aluminum pallet

4.6

Amount of oil necessary for lifting of its level from mark of MIN to mark MOVE measuring щупа

1.5

Diesel models

 

   - Without the oil filter

4.8

   - Including the oil filter

5.1

Amount of oil necessary for lifting of its level from mark of MIN to mark MOVE measuring щупа

1.0

Liquid of cooling of the engine

l

Petrol models

   - L models 1.6 and 1.8

 

      • Models without the conditioner
air (To/in)

7.0 (approximately)

      • Models with To/in

8.0 (approximately)

   - Models of 2.0 l

8.3 (approximately)

Diesel models

 

   - Models without a turbo-supercharging and To/in

7.5 (approximately)

   - Models without a turbo-supercharging and with To/in

8.5 (approximately)

   - Models with a turbo-supercharging

9.0 (approximately)

Transmission oil

l

Manual box of gear shifting (RKPP)

1.9

Automatic transmission (AT)

   - "Sukhoi" case

6.2

   - Liquid replacement

2.4

Hydraulic LHM liquid

l

All models

5.4

Volume of a fuel tank

l

All models

65


Engine

Oil filter

Champion F104

Tension of a driving belt of auxiliary units (it is made by means of the special Citroёn tool)

60 SEEM blocks

Cooling system

Petrol models

Structure cooling жидкости*

   - 28 % of antifreeze

Frost resistance to - 15°С

   - 50 % of antifreeze

Frost resistance to - 30°С

* See also instructions of manufacturers of antifreeze.

Power supply system

Characteristic

Value

Petrol models

Idling turns (mines-1)

850 ± 50 (to adjustment are not subject,
ECU) are supervised

The maximum admissible
concentration WITH in the fulfilled gases
at an idling mix

0.4 % (to adjustment is not subject,
ECU) is supervised

For more details see appropriate section of Head of the Power supply system and release.

Filtering element of an air purifier

Champion U615

Fuel filter

Champion L206

Diesel models

Idling turns (mines-1)

 

   - Models without To/in

800 +0, 800-50

   - Models with To/in

850

Turns of prevention spontaneous останова engine (mines-1)

1500 ± 100

Thickness of an adjusting washer of installation of turns of prevention останова, mm

 

   - Lucas

4.0

   - Bosch

3.0

Turns of fast idling (mines-1)

950 ± 50

Filtering element of an air purifier

Champion U543

Fuel filter

Champion L141

Type of candles of an incandescence

CHAMPION CH68

Ignition system

Type of spark plugs

   - L models 1.6 and 1.8

Champion RС9YСС

   - Models of 2.0 l

Champion RС7YСС

Size of an interelectrode gap, mm

0.8

* the Size of an interelectrode gap is specified proceeding from the requirements shown by Champion firm. At installation of candles of other producers adhere to recommendations of the last.

Brake mechanisms

Minimum admissible thickness
frictional slips

mm

Blocks of forward brake mechanisms

3.0

Blocks of back brake mechanisms

2.0


Efforts of a tightening of carving connections

Nanometer

Bolts of fastening of an assembly bracket of a natyazhitel
driving belt of auxiliary units

22

Bolts of fastening of wheels

90

Spark plugs

25

Stopper of a jellied/control opening
transmission case

20

Stopper of a drain opening of transmission

30