Citroen Xantia

1. Lower a windowpane on two thirds of its course, then remove the panel of an internal upholstery and the sealing screen of a door (see. Removal and installation of panels of an internal upholstery of doors).

2. From the interior of a door release a plastic clamp of fastening of a windowpane to a regulator: for what develop a clamp on 45 °, remove it, then liberate glass from the regulator mechanism.

3. Remove a sealing strip from bottom edge of a window aperture.

4. Ask the assistant and to take glass it in the lifted situation, or lift glass and fix it an adhesive tape.

5. In a forward part of a door give a nut of fastening of a forward directing runner of glass. Take a runner through an opening in a doorframe.

6. Remove a sealing strip from back edge of a window aperture and take glass from a door.

1. Freely fill on a regular place a forward directing runner, then lower glass at a door and fix it on a regulator a plastic clamp, having tracked reliability of a zashchelkivaniye of the last.
2. Correct the provision of a directing runner and fix it a nut.

3. Establish a sealing strip on the back region of a window aperture, having tracked, that the directing ledge at back edge of glass got to the trench of a rubber strip. Make sure of density of landing of a sealing strip.

4. Plant a sealing strip from within on bottom edge of a window aperture.
5. Establish on a door the plastic sealing screen and the panel of an internal upholstery (see. Removal and installation of panels of an internal upholstery of doors).

1. Completely lift a windowpane, then remove the panel of an internal upholstery and the plastic sealing screen of a door (see. Removal and installation of panels of an internal upholstery of doors).

2. In the bottom back corner of a door turn out the screw of fastening of a directing trench of a windowpane.

3. Then take a trench through an opening at doors.

4. Completely lower glass, develop under 45 ° and remove a plastic clamp, then liberate glass from the regulator mechanism.
5. Remove a sealing strip from bottom edge of a window aperture.
6. Remove a sealing strip from back edge of a window aperture and take glass from a door.

1. Freely fill on the regular place a back directing trench, then lower glass at a door and fix it a plastic clamp on a window regulator regulator. Track reliability of a zashchelkivaniye of a clamp.
2. Correct position of a directing trench so that its upper edge was included into gearing with a uvula in the top part of a door, then screw and tighten the fixing screw.
3. Plant a sealing strip on the back region of a window aperture (track hit in a groove of a strip of a directing ledge of glass). Make sure of density of landing of a strip.
4. Plant a sealing strip from within on bottom edge of a window aperture.
5. Establish the plastic sealing screen and the panel of an internal upholstery of a door (see. Removal and installation of panels of an internal upholstery of doors).

1. Lower door glass on two thirds of its course, then remove the panel of an internal upholstery and the plastic sealing screen of a door (see. Removal and installation of panels of an internal upholstery of doors).
2. From the interior of a door release a plastic clamp of fastening of glass to a window regulator regulator: turn under 45 ° and remove a clamp, then liberate glass from the regulator mechanism.
3. Lift glass in the top situation and fix it an adhesive tape. Make sure of reliability of fastening of glass.
4. Through an opening in a doorframe disconnect electroconducting from the electromotor of a drive of a window regulator.

5. Give three nuts of fastening of assembly of the electromotor, then two more with which the directing runner of glass fastens.

A — three nuts of fastening of assembly of the electromotor of a drive of a window regulator
In — two nuts of fastening of a directing runner

6. Take assembly through an opening at doors.